Fleet maintenance and service agreements for commercial trucks and trailers.

Planned maintenance and repair, so more of the work happens in your schedule and less on the shoulder.

Running a fleet? Talk about your fleet Call Nexgen (204) 960-5390 Tell us how many units, what they are and where they run. Prepare your enquiry first if that helps.
Buying for a company? Service agreements and vendor onboarding Agreement topics and our vendor file.

Locations in Winnipeg and Brandon, on Highway 1.

A fleet runs on a schedule.

Every unit that stops on the road leaves a hole in it. Planned maintenance moves that work into windows you choose, one unit at a time.

Plan board Six weeks

Example
Example plan board over six weeks
UnitPlanned maintenanceWhat happens
Tractor 104Week 1Planned maintenance as scheduled.
Trailer 5310Week 2The PM finds a fault that would have stopped the unit on the road in week 4.
Tractor 117Week 3Planned maintenance as scheduled.
Trailer 5322Week 5Planned maintenance as scheduled.
Tractor 131Week 6Planned maintenance as scheduled.
Example units and weeks, not Nexgen records or software. Trailer 5310 would have stopped on the road in week 4; its week 2 PM finds the fault instead.

Problems we commonly inspect

The same units keep failing at the roadside
Repeat calls for brakes, air, tires or batteries usually mean wear is not being caught between services.
Service dates slipping
Routes come first, the due date passes, and the unit runs until something gives.
Units parked waiting for repair
A truck out of service for a repair or for parts is a route someone else has to cover.
Inspection findings
Write-ups at the roadside or in the yard for items a routine check would have caught.
No history per unit
Without a record of what was found and done on each unit, it is hard to see which ones cost the most or what is coming due.
Mixed fleet, mixed schedules
Different makes, ages and duties, each with its own manufacturer schedule to keep track of.

How we propose to work with your fleet

Five steps from the first call to looking back over your units together. It is a proposal: the details are settled with you.

  1. A first conversation

    How many units you run, what they are, where they work and what keeps going wrong. One call is enough to start.

  2. Your unit list

    Unit numbers, make and model, VIN, kilometres or hours, and when each unit was last serviced. The list you already keep is a fine starting point.

  3. A maintenance plan

    Intervals set around how each unit actually runs, with PM windows booked into your schedule before faults turn into road calls.

  4. Work by unit number

    Planned maintenance and repairs referenced to your unit numbers, so a repeat fault on the same unit is easier to spot.

  5. Review together

    Look back over the units together: what came up, what repeated, and whether an interval or a part should change.

What we check

Depending on the symptoms, the technician may check:

  • Brakes, brake adjustment and linings
  • Air system leaks, the air dryer and the tanks
  • Tires, wheel ends, hubs and seals
  • Lamps, reflectors and wiring
  • Engine oil, filters and other fluids, with grease and lube points
  • Belts, hoses and the cooling system
  • Batteries, cables and the charging system
  • Suspension and steering components
  • A review of stored fault codes and dash warnings
  • Trailer items: landing gear, doors, mud flaps and the 7-way connection

Common causes

Possibilities, not a diagnosis of your unit:

  • Intervals set by the calendar alone, while some units run far more than others
  • Short trips, idling and stop-start work that wear parts faster than the odometer suggests
  • Winter cold starts, road salt and moisture in air lines and connectors
  • Driver-reported issues that never reach the maintenance plan
  • Small leaks and early wear left until the next service
  • Repairs deferred from one service to the next

Service agreements

An agreement should fit your units and the way they run. These are the topics a first agreement conversation settles. None of them is a fixed offer: each is agreed with you.

Setting us up as a vendor? The vendor file is below.

Topics to settle together

Scope, unit by unit
Which units are covered and what work is included: planned maintenance alone or repairs as well, tractors, trailers or both.
Maintenance intervals
Intervals for each unit type and duty cycle, and how PM windows are booked around your dispatch.
When a covered unit breaks down
How a breakdown is reported, who authorises the repair, and how a roadside call is handled for units under the agreement.
Records by unit
What you receive after each job, and how it is referenced to your unit numbers so the history stays with the unit.
Billing and purchase orders
How work is authorised (PO numbers, approval limits), how invoices are set out, and the payment terms.

Vendor file

For setting Nexgen up as a vendor. Only verified details are shown here. For anything else your onboarding process needs, ask when you call.

Verified details

Business name
Nexgen Fleet Solutions INC
Winnipeg phone
(204) 960-5390
Winnipeg address
646 Pipeline Road, Headingley, MB R4H 1C8
Brandon phone
(431) 279-4008
Brandon address
1601 Moreland Ave, Brandon, MB R7C 1A6
Website
nexgenfleet.ca

Prepare your enquiry

Go through these before you call, so nothing is missed.

Nothing is sent from this page.

Who you are
Roughly how many units
Unit types (choose any that apply)
Where they run (choose any that apply)
What you need (choose any that apply)

For example a fault that keeps coming back, or the makes you run.

Use these questions as a checklist for your call. With JavaScript turned on, this page also writes your answers up as a summary you can copy.

Call and read this out (204) 960-5390

Where we work: Winnipeg, Highway 1 and Brandon

Roadside assistance and mobile truck and trailer repair 24/7 along the Trans-Canada Highway (Highway 1) between Winnipeg and Brandon, in both directions: Headingley, St. François Xavier, Elie, Oakville, Portage la Prairie, MacGregor, Austin, Sidney, Carberry and Douglas, and the yards and roads around them.

Questions

How often should a truck have preventive maintenance?
It depends on the manufacturer's schedule and how the truck works. Kilometres, engine hours, duty, loads and season all move it: a unit on short, heavy, stop-start work usually needs service sooner than one on steady highway runs. We start from the manufacturer's schedule and adjust it with you.
What does a preventive maintenance service include?
It is agreed per fleet, so it varies. It may cover brakes, the air system, tires and wheel ends, lamps, fluids and filters, belts and hoses, batteries, suspension and steering, and a fault-code review; the list is confirmed with you before the first service.
Do you do oil changes, grease and lube?
Ask about it as part of a maintenance plan. Oil, filters, grease and lube are normally part of a preventive service, and we will confirm what can be included for your units.
Is preventive maintenance the same as a safety inspection?
No. A preventive service looks for wear and faults to fix before they strand a unit; a required provincial safety inspection is a separate matter, so ask about it separately.
Can maintenance be done where our units park?
Ask when you set up the plan. Some work can be done where units are parked; work that needs a hoist is often better handled in a shop.

Straight answer

Can fleets arrange preventive maintenance?

Yes. Fleet preventive maintenance is one of the services both locations offer, with service agreements for fleets that want planned work on a schedule rather than roadside calls.

The fleet page sets out the plan board, the process and the agreement topics, and an enquiry builder composes what to tell us (nothing is sent from the site).

Fleet maintenance
Running trucks and trailers?

Talk about your fleet

Have your unit list to hand: unit numbers, makes and kilometres. If you prepared a summary above, read it out.
Call Nexgen (204) 960-5390
Unit stopped on the road? Roadside help. We take calls 24/7.