Truck repair Truck repair
Truck not running right, and not sure what is wrong?
Nexgen repairs commercial trucks and tractors when the fault is obvious and when it is not: a new noise, a warning light you do not recognise, a pull, a leak or a truck that just feels wrong. Describe what you see, hear and smell, and we work out which system is involved, whether a technician can look at it where the truck is, and what happens next. If a red light is on or the brakes or steering feel different, stop somewhere safe first.
Can I keep driving while I work out what it is?
It depends on what the truck is telling you. A red stop-engine or oil-pressure light, a temperature gauge climbing, smoke, a change in how it brakes or steers, or fluid landing on something hot all mean pull over and shut down once you are off the road. An amber light with the truck driving normally, a new sound that does not change with braking or steering, or a few drops under it at the yard usually leave time to have it looked at. Call and describe it before you decide.
- 1Air system
- 2Fuel
- 3Electrical
- 4Brakes and wheel ends
- 5Engine and aftertreatment
Example: the systems a truck inspection covers, left to right; the one that stopped the truck is where the work begins.
Call the nearest location.
Call now (204) 960-5390Injury, fire or danger: call 911 first. We take calls 24/7.
- Winnipeg (204) 960-5390
- Brandon (431) 279-4008
Problems we commonly inspect
- It is making a noise it did not make before
- A knock, grind, squeal, clunk or whine. When it happens (idling, pulling away, braking, turning, over bumps) points to the system.
- A warning light I do not recognise
- Amber or red, steady or flashing. A photo of the dash and any code on the display saves a lot of guessing. Warning lamps and fault codes
- Pulling, wandering or vibrating
- A pull to one side, a shimmy through the wheel or a shake that comes in at one speed: steering, suspension, tires, brakes or the driveline. Suspension and steering
- Leaking something
- Colour and position matter. Green, orange or pink is often coolant; brown or black is oil or fuel; red may be transmission or steering fluid.
- Down on power or will not pull a grade
- With or without a light: fuel supply, intake and boost, or an emissions derate are the usual places to start.
- Running hot, smoking or smelling wrong
- Temperature creeping up, white, blue or black exhaust smoke, or a hot smell of coolant, oil or brakes. Overheating and coolant leaks
- Hard to shift, slipping or will not go into gear
- Clutch and transmission complaints: tell us what it does, and we will say whether the work can be done.
Stop driving, or can it wait?
Stop and get help
- A red stop-engine or low oil-pressure warning.
- The temperature gauge heading for the top, or steam from under the hood.
- Smoke from the engine bay, a wheel or underneath, or a burning smell.
- Longer stops, a pull when braking, or play or heaviness in the steering.
- Fluid running rather than dripping, or anything leaking onto the exhaust.
May be safe to assess further
- An amber light while the truck drives and sounds as it always does.
- A new noise that does not change with braking or steering and is not getting louder.
- A few drops on the yard surface after parking, with gauges and levels normal.
Continuing to operate may risk further damage or create a safety issue. When in doubt, stop where it is safe and call. Injury, fire or immediate danger: call 911 first.
What to do right now
- Note what it does and when: cold or warm, idling or under load, braking, turning, or only at a certain speed.
- Photograph the instrument cluster with the lights showing, plus any message or code on the display.
- If something is leaking, look at the ground from where you stand: the colour, where it lands, and whether it drips or runs.
- A red light, smoke, a hot smell or any change in brakes or steering: get off the road and shut down. Fire or anyone hurt: call 911 before anything else.
What not to do
- Do not clear fault codes before a technician has read them; they are part of the evidence.
- Do not open the radiator or coolant cap on a hot engine.
- Do not keep topping up a fluid that keeps disappearing and carry on with the run.
- Do not start swapping parts on a guess; the wrong part costs the same downtime as the right one.
When you call, have ready
- Make, model and year, the unit number, and kilometres or engine hours.
- What the driver noticed, in their own words, and when it started.
- A photo of the dash and any fault code or message.
- Where the truck is and whether it can be moved safely.
- Loaded or empty, and whether a trailer is coupled.
- Recent repairs or service, and anything that changed just before the problem began.
Not sure exactly where you are?
Your phone can find the spot and write the text for you.
Your text
Uses this phone’s location. Nothing is sent: copy it to paste in a message or read it out when you call.
What we check
Depending on the symptoms, the technician may check:
- A walk-around and a conversation with the driver about what changed
- Active and stored fault codes, and the warnings on the dash
- Fluid levels and the source of any leak
- Belts, hoses and the cooling system
- Brakes, the air supply and wheel ends
- Steering and suspension parts, and the wear pattern on the tires
- Batteries, charging and the wiring behind a warning
- Intake, fuel supply and exhaust aftertreatment symptoms
Common causes
Possibilities, not a diagnosis of your unit:
- A worn or loose part that has started to move: a bushing, a mount or a bearing
- A failing sensor or a wiring fault that sets a warning while the part itself is fine
- A leaking hose, seal or gasket
- A clogged filter or a restriction in the air or fuel supply
- A brake that is dragging or out of adjustment
- Tire damage or uneven wear
- An emissions system that needs a regeneration or has a fault
Roadside or shop?
Often done where the unit is
- Narrowing down which system is at fault
- Reading fault codes and checking what set them
- Hoses, belts, lamps and many sensors
- Repairs on parts that can be reached without lifting the truck
Often better handled in a shop
- Internal engine, transmission or clutch work
- Repairs that need the truck on a hoist or major parts removed
- Long jobs, or ones waiting on parts that take time to arrive
Every fault and every spot is different. Describe it on the call and we will tell you what can be done where the unit is.
How it works
Describe it
Call with what the truck is doing, in plain words. You do not need to know the name of the part.
Narrow it down
We ask the questions that separate one system from another: when it happens, how often, and what changed.
Decide where
Whether it can be looked at where the truck stands or is often better handled in a shop, and whether it is safe to move meanwhile.
Repair or say so
Most faults lead to a specific repair. For clutch, transmission, engine, driveline, hydraulic hose or cab A/C problems, tell us what is happening and we will say whether it can be done.
Where we work: Winnipeg, Highway 1 and Brandon
A truck that starts acting up partway between Brandon, Headingley and Winnipeg on the Trans-Canada Highway (Highway 1) is usually better stopped at the next safe pull-off than pushed to the end of the run. Say which way you are heading and what you passed last.
Roadside assistance and mobile truck and trailer repair 24/7 along the Trans-Canada Highway (Highway 1) between Winnipeg and Brandon, in both directions: Headingley, St. François Xavier, Elie, Oakville, Portage la Prairie, MacGregor, Austin, Sidney, Carberry and Douglas, and the yards and roads around them.
- 646 Pipeline Road, Winnipeg, MB R2P 2T7 (204) 960-5390
- 1601 Moreland Ave, Brandon, MB R7C 1A6 (431) 279-4008
Questions
- What if I do not know what is wrong with the truck?
- That is what this service is for. Describe what you notice (sounds, lights, smells, how it drives) and we work out which system is involved before anyone talks about parts.
- Is a warning light always serious?
- No, but a red one usually means stop. Amber lights often flag a fault that can wait for a planned repair; red or flashing lights mean pull over and shut down once you are off the road. A photo of the dash helps us tell which over the phone.
- Do you do clutch, transmission or engine rebuilds?
- Tell us what is happening and we will say whether it can be done. That kind of work often needs a shop and specific parts, so we confirm it before booking rather than promise it up front.
- Can a technician come to the truck?
- Often, depending on the fault and where the truck is. Many problems can be found and fixed where the unit stands; mobile repair covers yards and job sites, and roadside repair covers trucks stopped on the highway.