Trailer repair Trailer repair
Trailer lights out, brakes dragging or ABS lamp on?
Nexgen repairs commercial trailers: brakes and the trailer ABS lamp, lights and the 7-way connection, air lines and gladhands, suspension and air bags, landing gear, doors and the visibility items an inspection writes up. Much of it can be done where the trailer is parked or stopped, if it can be worked on safely. If the trailer brakes are dragging or the lights are out after dark, get off the road and call before going further.
Can I keep pulling a trailer with a brake or lighting problem?
Not with brakes that drag, lock or will not release, and not after dark without working tail, brake and marker lamps. A dragging trailer brake builds heat quickly and can start a wheel-end fire; missing lamps leave following traffic guessing. The ABS lamp on its own, with brakes that apply and release normally, usually means the anti-lock function may be out while ordinary braking still works. Have it checked before the next dispatch rather than at the next service.
Example: the tractor feeds the trailer air and power through the glad hands and the seven-way; those connections are the first place a trailer fault is checked.
Call the nearest location.
Call now (204) 960-5390Injury, fire or danger: call 911 first. We take calls 24/7.
- Winnipeg (204) 960-5390
- Brandon (431) 279-4008
Problems we commonly inspect
- Trailer brakes dragging or will not release
- A hot smell, a wheel giving off smoke or a trailer that feels heavy: adjustment, a chamber, a valve or the air supply. Air leaks and air pressure
- Trailer ABS lamp stays on
- The lamp on the trailer, or the trailer indicator in the cab, stays lit after the start-up check: a sensor, its wiring or the ABS module.
- Lights out or flickering
- One side, all the markers, or lamps that work only when the cord is moved: often the 7-way plug, the cord or a ground. Electrical faults and wiring
- The 7-way connection is not working
- Green corrosion on the pins, a loose socket or a crushed cord, and the trailer gets no power for lamps or ABS.
- Trailer sitting low or leaning
- A leaking air bag, a height-control valve out of setting, or a broken spring or hanger.
- Landing gear will not crank or hold
- Stiff, slipping or bent legs, or a gearbox that will not change range.
- Doors that will not close, seal or latch
- Hinges, lock rods, cams and seals worn by daily loading: a freight security problem as much as a repair.
- Inspection write-ups
- Mud flaps, reflective tape, reflectors and other visibility items flagged before the trailer can go out.
Stop driving, or can it wait?
Stop and get help
- A trailer wheel giving off smoke or a hot smell.
- Trailer brakes that will not release, or a trailer that pulls the tractor to one side when braking.
- No working tail, brake or turn lamps after dark.
- A trailer down on its bump stops or leaning visibly.
- Doors that will not latch with freight inside.
May be safe to assess further
- The trailer ABS lamp on, with brakes that apply and release normally.
- A single marker lamp out in daylight.
- Landing gear that is stiff but still cranks and holds the trailer.
Continuing to operate may risk further damage or create a safety issue. When in doubt, stop where it is safe and call. Injury, fire or immediate danger: call 911 first.
What to do right now
- A trailer wheel smoking or smelling hot: stop off the road, set the tractor parking brake and keep well clear of that wheel. Flames or anyone hurt: call 911.
- Walk round the trailer only in a yard or on the side away from traffic, and note which lamps work and which do not.
- Look at the 7-way cord and the air lines without pulling on them: are they connected, hanging low or rubbing on something?
- Photograph the ABS lamp, the trailer unit or plate number, and any damage you can see.
What not to do
- Do not drop a loaded trailer onto landing gear that slips or is bent.
- Do not wind off or cage trailer spring brakes to free a trailer that will not release.
- Do not tape or splice a damaged 7-way cord at the roadside and run on it.
- Do not keep pulling with a wheel that is smoking or smells hot.
When you call, have ready
- Trailer type (dry van, flatbed, reefer, tanker), make, and unit or plate number.
- Where it is: a yard, a customer dock or the roadside, and whether it is coupled to a tractor.
- Loaded or empty, and whether the freight is time-sensitive.
- Which lamps are out, what the brakes are doing, and whether the ABS lamp is lit.
- Photos of the damage, the 7-way plug or the part that has failed.
- Whether the tractor lights another trailer properly, if you have had the chance to try one.
Not sure exactly where you are?
Your phone can find the spot and write the text for you.
Your text
Uses this phone’s location. Nothing is sent: copy it to paste in a message or read it out when you call.
What we check
Depending on the symptoms, the technician may check:
- Trailer brake adjustment, linings, drums and chambers
- The trailer ABS lamp, wheel-speed sensors, their wiring and the ABS module fault codes
- The 7-way socket, cord and pins, the grounds and the main trailer harness
- Lamps, markers, reflectors and reflective tape
- Air lines, gladhands and the trailer relay and emergency valves
- Suspension: air bags, the height-control valve, springs, hangers and bushings
- Landing gear legs, crank and gearbox
- Doors, hinges, lock rods, seals and mud flaps
- Tires and wheel ends, as part of the walk-around
Common causes
Possibilities, not a diagnosis of your unit:
- Corrosion in the 7-way plug or socket, worse after a winter of road salt
- A broken ground or a harness chafed where it crosses the frame
- Brakes out of adjustment, or a slack adjuster or cam that has seized
- A failed wheel-speed sensor or a damaged sensor lead
- A leaking air bag or a height-control valve out of adjustment
- Landing gear bent by a hard drop or run dry of grease
- Door hardware worn by daily loading
Roadside or shop?
Often done where the unit is
- Lamps, markers and many wiring faults
- 7-way sockets, cords and plugs
- Gladhands, trailer air lines and many valves
- ABS sensor wiring that can be reached safely
- Mud flaps, reflectors and door hardware
Often better handled in a shop
- Brake jobs that need wheels and drums off
- Suspension work that needs the trailer lifted and supported
- Landing gear replacement
- Frame, crossmember or other structural damage
Every fault and every spot is different. Describe it on the call and we will tell you what can be done where the unit is.
How it works
Call, or send your location
Call the location nearest the unit, or text a map pin with the unit number, then call.
Describe the truck, trailer and problem
What you see, hear and smell, the warning lights or codes, and whether the unit is loaded.
We assess it with you
From what you describe, and again when the technician reaches the unit: what is wrong, and whether it can be repaired where it stands.
Repair where the unit is, when it is appropriate
When the fault and the spot allow it to be done safely and properly.
A shop or further work, when it is needed
When it cannot be done on site, we tell you why and what the next step is.
Where we work: Winnipeg, Highway 1 and Brandon
On the Trans-Canada Highway (Highway 1) near Brandon, Headingley or Winnipeg, a trailer with lamps out or a hot wheel is safer on a wide shoulder or in a pull-out than on a narrow one; tell us the direction you are travelling and the nearest marker so we know which side the trailer is on.
Roadside assistance and mobile truck and trailer repair 24/7 along the Trans-Canada Highway (Highway 1) between Winnipeg and Brandon, in both directions: Headingley, St. François Xavier, Elie, Oakville, Portage la Prairie, MacGregor, Austin, Sidney, Carberry and Douglas, and the yards and roads around them.
- 646 Pipeline Road, Winnipeg, MB R2P 2T7 (204) 960-5390
- 1601 Moreland Ave, Brandon, MB R7C 1A6 (431) 279-4008
Questions
- Why are my trailer lights not working?
- Most often the 7-way connection: corroded pins, a loose socket or a damaged cord. After that, look at a broken ground or a chafed harness. If the tractor lights a different trailer properly, the fault is on the trailer side.
- What does the trailer ABS lamp mean?
- The trailer anti-lock system has logged a fault. Ordinary braking usually still works but the anti-lock function may not, and the lamp is an inspection item. A sensor, a wire or the module is the usual cause; book it in rather than running with it.
- Can you repair a trailer at a customer dock or in our yard?
- Often, yes, where it can be worked on safely. Lamps, wiring, air lines and many brake and suspension items can be handled where the trailer is parked; work that needs it lifted is often better handled in a shop.
- Do you repair liftgates or reefer units, or do welding?
- Ask us first. Those are not confirmed services yet, so tell us what has failed and we will say whether it can be done.